Korg Triton-Rack - 5. Global mode; GLOBAL 1.1: System

101
Basic functions
Other functions
Adjusting the contrast (brightness)
of the LCD screen
Use the GLOBAL 1.1: System, Preference page “LCD
Contrast” to make adjustments.
Using the TRITON-Rack as a data
filer
MIDI exclusive data transmitted from an external
device can be received by the TRITON-Rack and saved
on a floppy disk (the Data Filer function). This is done
using the Disk mode Save page “Save Exclusive”
(
☞PG p.135).
Shortcuts
[MENU] key + numeric keys [0]–[9] x2
• Access the various pages within each mode. Hold
down the [MENU] key, and use numeric keys [0]–
[9] to input a two-digit page number.
[MENU] key + [ ], [ ] keys
• Access the various pages within each mode. Hold
down the [MENU] key, and use the [ ], [ ] keys
to move.
[TIMBRE/TRACK] key + function keys [F1]–[F8]
• Access the parameters within each page. In pages
of Combination mode or Multi mode that show
timbres 1–8/tracks 1–8 or 9–16 (such as COMBI 1.1:
Play, Prog), hold down the [TIMBRE/TRACK] key
and press the [F1
1/9]–[F8 8/16] keys to move the
cursor.
[ENTER] key + numeric keys [0]–[9]
• Access the utility menu commands of each page
(up to ten items). Hold down the [ENTER] key and
press a numeric key [0]–[9] to select from up to ten
of the utility menu items.
[ENTER] key + MIDI-connected keyboard
Hold down the [ENTER] key and play a note on a
MIDI-connected keyboard to perform the following
types of input.
• Input note number values or velocity values
• Select “KEY” in GLOBAL 5.1: DKit, MULTI 5.1:
RPPR, RPPR Setup page
• Select base key and index in Sampling mode