Operating Instructions OIO 14en Edition 07/2017 31
Removing the flowmeter
Installation, removal and connection
1. In case of operation at higher temperatures wait until the device has cooled down to the ambient
temperature.
2. Drain the pipe system or divert the fuel via the bypass.
3. Dismantle the flowmeter.
4. Apply the protective cover.
5. Observe the chapters "Storage" and "Preserving" on the subject of storing the flowmeter.
WARNING
Risk of injury through emitted hot, poisonous or corrosive pumped liquid when removing the
flowmeter.
► Observe the safety regulations for handling dangerous liquids.
► Ensure that the flowmeter is not under pressure.
► Collect the emitted pumped liquid safely and dispose of it in an environmentally compatible
manner.
To Next Page
Loading...
