50 OIO 14en Edition 07/2017 Operating Instructions
Parts list
Appendix
Parts list
Tab. 1 Parts list
Pos. no. Part Pos. no. Part
039 Distance sleeve 739.5** O-ring
041 Sleeve 817.1 Deep-groove ball bearing
054 Spacer 817.2 Deep-groove ball bearing
056 Spacer 817.3 Deep-groove ball bearing
056*** Spacer 817.4 Deep-groove ball bearing
057.1 Threaded ring 818.1 Angular-contact ball bearings
057.2 Threaded ring 818.2 Angular-contact ball bearings
062 Spacer 821.1 Four-point contact bearings
064.1 Supporting ring 821.2 Four-point contact bearings
064.1**** Supporting ring 868.1 Support ring
064.2 Supporting ring 868.2 Support ring
070.1 End cover 868.3 Support ring
070.2 End cover 868.4 Support ring
080.1 Bearing cover 869.2 Circlip
080.2 Bearing cover 869.4 Circlip
107.1* Pipe threaded flange 870.1 Circlip
107.2* Pipe threaded flange 870.2 Circlip
115.1* Flange 904.1 Lock washer
115.2* Flange 904.2 Lock washer
128 Measuring housing 915.1 Socket screw
259 Pole wheel 915.1* Socket screw
597.1 Screw plug 915.2 Socket screw
597.2 Screw plug 915.2* Socket screw
672.1 Measuring screw large 915.3 Socket screw
672.2 Measuring screw small 915.3* Socket screw
739.1 O-ring 915.4 Socket screw
739.2 O-ring 915.4* Socket screw
739.3 O-ring 915.5 Socket screw
739.3* O-ring 915.6 Socket screw
739.4 O-ring 915.7 Socket screw
739.4* O-ring
* parts for pipe threading or flange connection alternatively
** two units if two pick up holes exist
*** for OMG140: replaced by sleeve, spare part 041
**** only for OMG 32
To Next Page
Loading...
