Kramer FC-18 - FC-18 RS-232 & Remote Page for CEC Control; FC-18 CEC Configuration Settings; FC-18 CEC Commands Configuration Details

Kramer Electronics Ltd.
FC-18 – Controlling the Display via FC-18
15
Figure 10: RS-232 & Remote Page
3. Check Port Definition to FC-18 Control.
Figure 11: RS-232 & Remote Page – RS-232 Controls FC-18
4. Send the CEC protocol command to control the display (see Protocol 3000 Commands
on page 63).
The display is controlled by RS-232 via the HDMI port.