Kramer FC-18

Kramer Electronics Ltd.
FC-18 – Using the Embedded Web Pages
43
Managing EDID
Read the EDID from the output, from the default or from a custom file to the FC-18.
You can read the EDID only when EDID mode is set to User (see Defining Video and
Audio Settings on page 42).
To acquire the EDID from the default EDID:
1. In the Navigation pane, click EDID. The EDID management page appears.
2. Make sure that EDID Mode is set to User. If it is set to Transparent, a warning message
appears.
Figure 63: EDID Mode Message
3. Click Default.
Figure 64: EDID Management Page