36
Dashboard
Wi-Fi Management
Wi-Fi Management
System Info
System Info
GPS Search
Here you can manage the Wi-Fi settings, select the channel to
be used (expert users only), and reset its conguration.
Wi-Fi modes are:
• ON
• AUTO: switches the Wi-Fi on when the vehicle is stopped
and automatically switches it off when the dash logger starts
recording according to the setting you performed on the
“Parameters” page of Race Studio 3 software.
• OFF
Select Channel function is for expert users only. Select
which Wi-Fi channel to use. Available options are:
• AUTO (default – recommended)
• 1
• 6
• 11
Wi-Fi reset CFG resets Wi-Fi conguration and is helpful if
you forget your Wi-Fi password.
This page shows the system information of the MXS 1.3 dash
logger displaying:
• Model Name
• Serial Number
• Firmware Version
• Boot Version
• And information of any attached devices.
SSID Identication
When connecting to the unit’s Wi-Fi signal, you can obtain
the Wi-Fi SSID of a specic dash logger. Connecting
directly to the dash logger with a PC gives the Race Studio
3 software direct access to retrieve the logged data and
congure the MXS 1.3 dash logger.
Check the connection status of GPS satellites.
View with page by pressing the View/Quit button twice.
System Info
GPS Page
To Next Page
Loading...