8
Usage and Setup
Storage
To store the motorcycle for an extended period,
take the following actions.
Before storing the motorcycle:
• Inspect all parts for function and wear.
• If repairs or replacements are necessary,
perform the service before storing.
Preparing for Storage
1. Drain fuel tank empty. See “Fuel Tank Draining
Procedure” on page 16.
2. Clean the motorcycle.
3. Change the engine oil and the oil lter. Clean the oil
screens.
4. Check the coolant level and service if necessary with
Motul MoCool coolant.
If the storage area will reach temperatures below 0°C
(32°F) drain the coolant completely [See pg. 13].
5. Check the tire pressure.
6. Remove the battery from the motorcycle. Store in a
safe, warm area, 0°-30°C (32°-85°F), out of direct
sun. Keep connected to a lithium rated oat charger.
7. Store motorcycle in a dry location with a stable
temperature.
8. Raise the motorcycle on the front and rear lifting
stands.
Removing from Storage
1. Fill coolant, if drained for freezing temperature
storage conditions [See pg. 13].
2. Install a fully charged battery.
3. Perform pre-ride checks.
4. Lower the motorcycle from the lifting stands.
5. Take for a test ride.
To Next Page
Loading...
Need help?
General