Kramer KDS-8-MNGR User Manual

Kramer Electronics Ltd.
KDS-8-MNGR – Using Embedded Web Pages
31
Running System Basic Commands
Use predefined system commands to carry out system basic actions.
To run system commands:
1. In the Menu tabs, select System. The System page appears.
2. In the top right area of the system page, click:
▪ Login to log into the embedded web pages.
▪ Logout to exit the embedded web pages.
▪ Change Password to change the admin login password.
▪ Save Config to save the current system configuration as a *.bin file to your local PC.
▪ Upload Config to upload a saved system configuration file. Click Upload Config to
locate the saved *.bin file, then click the “Open” button.
▪ Save Log to generate and save a copy of the current log data in, *.zip format, to your
local PC (this system log file can help diagnose configuration issues or other
problems).
The generated file is password protected and is only intended for use by authorized
technical support.
3. If required, open the drop-down list to select the user language for the embedded web
pages.
Basic commands are carried out.
Resetting the System
KDS-8-MNGR provides several reset options.
To reset the system:
1. In the Menu tabs, select System. The System page appears.
2. In the top right area of the system page, click:
▪ Factory Reset to reset the unit back to its factory default settings.
Factory Reset does NOT clear the transmitter and receiver history tables. To
completely remove old transmitter and receiver units from the system, use the
“Remove” option on the Transmitter and Receiver tabs (see Configuring
Transmitters on page 45 and Configuring Receivers on page 47).
▪ Reset all transmitters to reset all detected transmitters back to their factory default
settings.
▪ Reset all receivers to reset all detected receivers back to their factory default
settings.
▪ Reboot System to reboot this KDS-8-MNGR unit.

Kramer KDS-8-MNGR Specifications

General

Brand	Kramer
Model	KDS-8-MNGR
Category	Server
Language	English