Kramer KDS-8-MNGR User Manual

Kramer Electronics Ltd.
KDS-8-MNGR – Telnet Control
68
set all voip ir route N1
set all voip ir route N1
Route the specified transmitter or receiver’s IR input to all AVoIP devices’ IR outputs.
Available values for N1:
tx1~tx128 ............................. [Transmitter device ID (IR input)]
rx1~rx128 ............................. [Receiver device ID (IR input)]
set voip N1 usb device o1 route N2 1
set voip N1 usb device o1 route N2 1
Route the specified AVoIP device’s USB device to the specified AVoIP
device’s USB host.
Available values for N1:
tx1~tx128 ............................. [Transmitter device ID (USB device)]
rx1~rx128 ............................. [Receiver device ID (USB device)]
Available values for N2:
tx1~tx128 ............................. [Transmitter device ID (USB host)]
rx1~rx128 ............................. [Receiver device ID (USB host)]
set video wall preset N1
set video wall preset N1
Execute the specific video wall configuration.
N1 = 1~128 ....................... [Video wall group ID]
set multiview preset N1
set multiview preset N1
Execute the specific multiview preset.
N1 = 1~128 ....................... [Multiview preset ID]
set macro N1 run
set macro N1 run
Execute the specified macro immediately.
N1 = 1~16 ......................... [Macro ID]

Kramer KDS-8-MNGR Specifications

General

Brand	Kramer
Model	KDS-8-MNGR
Category	Server
Language	English