Kramer KT-2010

Kramer Electronics Ltd.
KT-2010 / KT-2010WM – Contents
11
6. Secure the wall bracket to the tablet cover using the M3 screw.
7. Use the double-sided tape to fix the tablet on a wall.
The tablet is mounted.
To mount the device on a secured wall bracket:
1. Mount the wall bracket (15 in KT-2010WM On-Wall Mount on page 7)
_on the installation point (screws not provided).
2. Connect the tablet to the wall bracket (lift it into place while
holding the top of the tablet slightly outward).
3. Use the provided M3 screw to secure the tablet to the wall bracket and back cover.
The tablet is mounted. (Figure 5)