Kramer SL-280

Kramer Electronics Ltd.
SL-280 – Remote Operation via the Web Pages
10
Loading and Saving Configurations
You can save a configuration for easy recall in the future.
At the bottom left hand side of all web pages there is a Load and a Save button. These enable
you to save the current configuration and load any pre-saved configurations.
To load a configuration:
1. Click Load.
An Explorer window opens.
2. Select the required file and click Open.
The device is configured according to the saved preset.
To save the current configuration:
1. Configure the device as required.
2. Click Save.
The Save File window opens.
3. Browse to the required location to which to save the file.
4. Enter the required name for the saved preset.
5. Click OK.
The current configuration is saved.
When using Chrome, the file is automatically saved in the Downloads folder.