Changing the Device Name
SL-280 device name is used by DNS when addressing the device and is necessary for
accessing the device for the first time using a Web browser.
To change the name of your device:
1. Click Device Settings on the left side of the web page (Figure 5
).
The Device Settings page appears.
Figure 7: Device Settings Page
2. In the General info area, enter a new name in the Device name field.
The device name cannot include any spaces, can be up to 14 characters and can
include letters, numbers, hyphens and underscores only.
3. Click Save Changes.
Setting the Date and Time
SL-280 web pages enable you to manually set the date and time for your SL-280 device or to
use a time server to automatically set the date and time. Date and time settings are used by
the device for logging purposes (see Using the Log on page 23
), and for time driven events as
defined through Kramer Control Builder.
To set the date and time for your device:
1. Click Device Settings on the left side of the web page (Figure 5
).
The Device Settings page appears (Figure 7).
2. In the Time and Date area, if Use time server (NTP) is set to ON, click OFF and click in
the relevant fields to define the date, time and time zone.
–OR–
3. Click the ON button, enter the time server address in the Time server address field, and
click Set.
To Next Page
Loading...
