Kramer SL-280

Kramer Electronics Ltd.
SL-280 – Protocol 3000
32
FACTORY
Functions
Permission
Transparency
Set:
FACTORY
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Reset device to factory
default configuration
#FACTORYCR
Get:
-
-
Response
~nn@FACTORYSPOKCR LF
Parameters
Response Triggers
Notes
This command deletes all user data from the device. The deletion can take some time.
Power cycle the device after performing the reset to apply the changes.
Example
#FACTORY<CR>
HELP
Functions
Permission
Transparency
Set:
-
-
-
Get:
HELP
End User
Public
Description
Syntax
Set:
-
-
Get:
Get command list or help
for specific command
1. #HELPCR
2.
#HELPSP
command_name
CR
Response
1. Multi-line: ~nn@Device available protocol 3000 commands:CRLF
command,SPcommand...CR LF
2. Multi-line:
~nn@HELPSP
command
:CR LF
description
CR LFUSAGE:
usage
CR LF
Parameters
command_name – name of a specific command
Response Triggers
Notes
Example
1. Get a list of all SL-280 commands:
#HELP<CR>
2. Get help for the ETH-PORT command:
#HELP ETH-PORT<CR>