Kramer SL-280 - Page 41

Kramer Electronics Ltd.
SL-280 – Protocol 3000
39
BEACON-INFO
Functions
Permission
Transparency
Set:
–
–
–
Get:
BEACON-INFO?
End User
Public
Description
Syntax
Set:
–
–
Get:
Get beacon information,
including IP address,
UDP control port, TCP
control port, MAC
address, model, name
#BEACON-INFO?␠port_id␍
Response
~nn@BEACON-INFO␠port_id,ip_string,udp_port,tcp_port,mac_address,model,
name
␍␊
Parameters
port_id – ID of the Ethernet port, 0 (wired Ethernet connection). 1 and higher (for future use).
ip_string – dot-separated representation of the IP address
udp_port – UDP control port
tcp_port – TCP control port
mac_address – dash-separated MAC address
model – device model
name – device name
Response Triggers
After execution, notification is sent containing beacon information.
Notes
There is no Set command.
The port_id parameter is not necessary and can be omitted.
Example
Get beacon information for port 0:
#BEACON-INFO?
0
<CR>