Kramer TP-578H - Page 30

26
TP-578H - Protocol 3000
Command – KLINK_INF
Command Type – System
Command Name
Permission
Transparency
Set:
KLINK_INF
Admin
Internal
Get:
-
-
-
Description
Syntax
Set:
Set K-Link MCU direct mode (DGKat
only)
#KLINK_INF␍
Get :
-
-
Response
~ nn@KLINK_INF␍
Parameters
None
Response Triggers
After receiving KLINK_INF command over DGCat
Command – KLINK_CLS
Command Type – System
Command Name
Permission
Transparency
Set:
KLINK_CLS
Admin
Internal
Get:
-
-
-
Description
Syntax
Set:
Set K-Link data mode (DGKat only)
#KLINK_CLS␍
Get:
-
-
Response
KLNK_ACK␍␊
Parameters
None
Response Triggers
Under receiving KLINK_CLS command over DGKat/RS-232
Notes