Kramer VP-550X

Kramer Electronics Ltd.
VP-550X - Operating and Controlling VP-550X
14
Talkover Mode
Figure 8: Talkover Mode
Setting OSD Parameters
VP-550X enables you to adjust OSD parameters for your convenience through the OSD
MENU buttons.
To set the OSD parameters:
1. On the front panel press MENU. The menu appears.
2. Select OSD > press Enter and define the OSD parameters based on the information in
this table:
Menu Item
Function
H-Position
Set the horizontal position of the OSD.
V-Position
Set the vertical position of the OSD.
Timer
Set the timeout period to Off or up to 60 seconds (default 10).
Transparency
Set the OSD background between 100 (transparent) and 0 (opaque).
Display
Select the information displayed on-screen during operation:
• Info (default) – the information appears for 10 seconds.
• On – the information appears constantly.
• Off – the information does not appear.
OSD parameters are set.