Managing EDID
Acquire the EDID from the outputs (HDMI), or from a pre-defined 1080p or 4K timing for
HDMI or PC.
To acquire EDID:
1. In the Navigation pane, click EDID. The EDID page appears.
Figure 23: EDID Page
2. In the Read from area on the left, click the required EDID source (outputs, timing, or
defaults), or click Browse to use an external EDID configuration File.
3. In the Copy to area on the right, click the input(s) to which to copy the selected EDID.
The Copy button is enabled.
4. Click Copy.
The selected EDID is copied to the selected inputs and the Copy EDID Results
message appears.
Figure 24: EDID Page –Copy EDID Results
5. Click Close.
EDID is acquired.
To Next Page
Loading...
