Safety
21
1) On the beige gearbox
The PTO speeds must not exceed 540 rpm! The
operating pressure of the hydraulic system must
not exceed 200 bar!
939100-4
MAX. 540/min
MAX. 200 bar
Order No. 939 100-4 (1x)
1) On the green gearbox
The PTO speeds must not exceed 1000 rpm!
The operating pressure of the hydraulic system
must not exceed 200 bar!
MAX.
1000/min
MAX. 200 bar
939101-4
Order No. 939 101-4 (1x)
2)
Before starting the machine,
read and observe the operating
instructions and safety
instructions.
Order No. 939 471-1 (1x)
3)
Do not touch any moving parts
of the machine. Wait until they
have come to a complete stop.
Order No. 939 410 2 (2x)
4)
While parts are moving, never
reach into areas where there is a
risk of being crushed.
Order no. 942 196 1 (4x)
5)
Danger from foreign objects
flung out. Move folding guards
into their protective position.
Order No. 939 572 0 (2x)
6)
When the machine is running,
keep your distance.
Order No. 942 197 1 (2x)
7)
The accumulator is subject to gas and oil
pressure.
Repair only possible by replacing the complete
unit.
Order No. 939 529-0 (1x)
8) Order No. 939 576-0 (2x)
a) Caution: some machine parts will stay in
operation for an extended period of time
before being switched off completely. Do not
touch any moving parts of the machine. Wait
until they have come to a complete stop.
b) Move the safety devices into their protective
position prior to start-up.
c) When the machine is running, keep your
distance.
939 410 2
STOP
a)
939 572-0
b)
942 197-1
c)
Pos: 13.13 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1
939 410 2
STOP
942 196 -1
939 572-0
942 197-1
To Next Page
Loading...
