Operation
46
Pos: 22.28 /Übersc hriften/Überschrif ten 2/A-E/A bbau der Masc hine @ 3\mod _1204792387824 _78.docx @ 73245 @ 1 @ 1
8.5 Detaching the machine
Pos: 22.29 /BA/Sic herheit/Eas yCut/Gefahr - M aschine abstell en_mitH ydrauli kschlauch @ 9\ mod_12208832 08423_78.doc x @ 128830 @ @ 1
Danger! - Unexpected movements of the machine
Effect: Danger to life, serious injuries
• No one is permitted inside the danger zone.
• Park the machine on a solid and even surface.
• You should not unhitch the machine until the engine has been switched off and the
ignition key has been removed.
• Secure the tractor against rolling.
• Use extreme caution when attaching implements to or detaching them from the tractor!
The accident prevention regulations must be complied with absolutely.
• When connecting the hydraulic hose to and disconnecting it from the hydraulic system of
the tractor, the tractor system as well as the machine system must be depressurised!
Move the appropriate control valves into the flow position.
• When detaching the machine, do not walk between the tractor and the machine!
Pos: 22.30 /BA/Be dienung /Eas yCut/Abstellstütze /Abstellstütze herunsch wenken Bild EC 28 00/3200 @ 10\ mod_12221564 32826_78.doc x @ 139032 @ @ 1
AMT-1-002
1
2
3
Figure 22
Pos: 22.31 /BA/Be dienung /Eas yCut/Abstellstütze /Abstellstütze herunntersch wenken Text EC 2800/3200/321 0/4013/6210 @ 11\mod_1222 666207476_78. docx @ 142 107 @ 2 @ 1
• Swivel the parking support (2) down and lock it in place with the bolt (1). Secure bolt with
spring cotter pin.
• Via the tractor hydraulics, lower the machine to the ground.
• Remove the PTO shaft guard retaining chains. Remove the PTO shaft from the PTO and
place it onto the PTO shaft support (3).
• Uncouple the lower suspension arm. Pull out the electrical connection cable between
tractor and machine from the plug on the tractor.
Pos: 22.32 /BA/Be dienung /Eas yCut/Abstellstütze /Abstellstütze herunntersch wenken Zusatz QFB Text EC 2800/3200/3210/4 013 @ 12\ mod_1224070921 399_78.docx @ 1 50233 @ @ 1
• Swivel the parking support (2) down and lock it in place with the bolt (1). Secure bolt with
spring cotter pin.
• Via the tractor hydraulics, lower the machine to the ground.
• Remove the PTO shaft guard retaining chains. Remove the PTO shaft from the PTO and
place it onto the PTO shaft support (3).
• Uncouple the lower suspension arm. Pull out the electrical connection cable between
tractor and machine from the plug on the tractor.
Pos: 22.33 /BA/Be dienung /Eas yCut/Gelenkwell e/Hydrauli kschlauch abkuppeln Bil d EC 2800/3 200 @ 10\mod _1222158372 686_78.doc x@ 1 39077 @ @ 1
To Next Page
Loading...
