Krone EasyCut 2801 CV - Input Gearbox

Maintenance
68
Pos: 26.30.1 /Üb erschriften/Üb erschriften 2/A-E/ Eingangsgetrie be @ 0\mod_ 1197005979596_ 78.docx @ 1 5454 @ @ 1
10.8 Input gearbox
Pos: 26.30.2 /B A/Wartung/Ölkontr olle_Wechsel/M ähwerke/Bild Eingangsgetrie be EC 28/32 CV CRI @ 3\mod _1204725801 898_78.doc x@ 72508 @ 2 @ 1
EC-0-040
Fig. 39
Pos: 26.30.3 /B A/Wartung/Ölkontr olle_Wechsel/Öl kontrolle_ALT Ölkontrolle SAE 90 @ 0\ mod_119700897381 5_78.docx @ 1 5649 @ @ 1
Oil level check:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Unscrew the inspection screw (1)
• Oil level up to bore hole (1)
• If necessary, top up the oil (SAE 90)
• Screw the check screw (1) back in.
Pos: 26.30.4 /B A/Wartung/Ölkontr olle_Wechsel/Öl wechsel_A LTÖlwechsel Versi on1 (Belüftungsfilt er) @ 0\mo d_119701002 6283_78.docx @ 15747 @ @ 1
Oil change:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Screw out the screw plug (2).
• Collect the used oil in a suitable drip pan
• Screw in the screw plug (2)
• Fill oil (3) (oil level up to hole (1))
• Screw the inspection screw (1) and ventilation filter (3) back in.
Pos: 26.30.5 /B A/Wartung/Ölkontr olle_Wechsel/Ölq ualität /Öl menge: siehe Ka pitel @ 0\mod _1197007859 486_78.doc x@ 15 531 @ @ 1
Oil quality / oil quantity: see Chapter "Filling Quantities and Lubricant Designations for
Gearboxes"
Pos: 26.30.6 /B A/Wartung/Ölkontr olle_Wechsel/Alt öl ordnungsg emäß entsorge n @ 0\mod_ 1197008117002_7 8.docx @ 155 50 @ @ 1
Note
The used oil must be disposed of correctly
Pos: 26.31 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1