Krone EasyCut 2801 CV - Lighting; Lighting Connection

Start-up
32
Pos: 18.24 /Übersc hriften/Überschrif ten 2/A-E/B eleuchtung @ 0 \mod_1195658 399935_78.doc x@ 1881 @ 2 @ 1
6.4 Lighting
Pos: 18.25 /BA/Sic herheit/Fahre n und Transport/ Beleuchtung/B eleuchtungsa nlage alle Masc hinen @ 7\mo d_1215519058839 _78.docx @ 1 03206 @ @ 1
Danger! - Lighting system
Effect: Danger to life, serious injuries or serious damage to the machine.
• Before transporting on public roads, always connect the lighting system and perform a
function check.
• Keep the lighting system clean. Soiled lights and spotlights impair road safety.
• Replace defective light bulbs or broken spotlights.
• When transporting on public highways, the machine must be in the transport position.
Pos: 18.26 /BA/I nbetriebnahme/ EasyCut/Beleucht ung/Anschlus sB eleuchtung T1 EC 2800/3 200/3210/401 3@ 10\mod_122 2070676913_ 78.docx @ 13867 4 @ 2 @ 1
6.5 Lighting connection
To comply with the Road Traffic Licensing Regulations, the machine is equipped as follows by
default:
• at the front with white clearance lamps (3)
• 3-chamber rear lamps (4) (direction indicator: reversing light and brake light)
• with red reflectors on the rear (5)
Pos: 18.27 /BA/I nbetriebnahme/ EasyCut/Beleucht ung/Anschlus sB eleuchtung T2 Bild EC 28 00/3200/2801/3 201/3600 @ 12 9\mod_13466 77007317_78.d ocx @ 1153135 @ @ 1
EC-063-1
Figure 9
Pos: 18.28 /BA/I nbetriebnahme/ EasyCut/Beleucht ung/Anschlus sB eleuchtung T3 EC 2800/3 200 3210/401 3/7540/9140 @ 1 1\mod_12224 21634749_78.d ocx @ 141790 @ @ 1
The lighting system is connected via the 7-pin connection cable (2).
To do this:
• Insert the 7-pin connection cable plug (2) into the appropriate socket (1) of the machine.
• Insert the 7-pin connection cable plug (2) into the appropriate socket of the tractor.
• Position the cable so that it will not come in contact with the wheels.
Pos: 18.29 /BA/I nbetriebnahme/ Schwader/Hin weis Sauberkeit der Stecker und Steckdosen @ 2\mod_1202 399563131_78. docx @ 59273 @ @ 1
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 18.30 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1