Commissioning
26
Pos: 16.21 /Übersc hriften/Überschrif ten 2/F-J/G elenkwelle montier en @ 2\mo d_120239834 2788_78.docx @ 5 9253 @ 2 @ 1
5.5 Install the PTO shaft
Pos: 16.22 /BA/I nbetriebnahme/ Erstinbetriebna hme/Gelenkwelle/M ähwerkeAn bau Gelen kwelle maschinenseitig Bild EC28 00/3200 @ 10\ mod_12218151 78476_78.doc x @ 138126 @ @ 1
Figure 5
Pos: 16.23 /BA/I nbetriebnahme/ Erstinbetriebna hme/Gelenkwelle/M ähwerkeAn bau Gelen kwelle maschinenseitig T ext EC 280 0/3200 @ 10\ mod_122181527 4211_78.docx @ 138148 @ @ 1
• Slide the PTO shaft (3) onto the gear input shaft (1) of the swivel gear.
• The safety mechanism must engage.
• Secure the PTO shaft guard against turning with pipe clamp (2).
• Set the PTO shaft down on the PTO shaft support (4).
Make sure the PTO shaft lock has engaged. Never use the safety chains to hold the PTO
shaft in place.
Pos: 16.24 /BA/Sic herheit/Gele nkwelle/Achtung - Schwenkber eich/Freiraum ü berprüfen @ 9\ mod_1220536 308930_78.doc x@ 126898 @ @ 1
Caution! - Swivel range of the PTO shaft
Effect: Damage to the tractor or the machine
• Check the swivel range and clearance of the PTO shaft!
Pos: 16.25 /BA/I nbetriebnahme/ Erstinbetriebna hme/Gelenkwelle/ Traktorwechsel Gelenkwell enlänge beacht en @ 6\mod_121 4996938591_ 78.docx @ 977 42@ @ 1
Caution! - Changing the tractor
Effect: Damage to the machine
When using the machine for the first time and whenever changing the tractor Check PTO shaft
for the correct length. If the length of the PTO shaft does not match the tractor, always observe
the chapter entitled "Adjusting the length of the PTO shaft".
Pos: 16.26 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1
To Next Page
Loading...
