Maintenance
83
Pos: 26.38.4 /B A/Sicherheit/Gefa hrenhinweise/Mä hwerke/Gef ahr- Schnell rotier ende Messerteller /Messertr ommeln_1 @ 0\mod_1197017 696736_78.d ocx @ 16001 @ 2 @ 1
Danger! - Rapidly rotating cutting discs/blade drums.
Effect: Danger to life or serious injuries.
• Switch off the engine and remove the ignition key.
• The cutting discs/blade drums continue to run!
• Do not leave the driver’s cab until the cutting discs/blade drums have come to a complete
stop.
Pos: 26.38.5 /B A/Wartung/Mäh werke/Schersich erung/Legende M ähholm Aufst ellung EasyCut´s A,B,RZ,RE,LZ, LE @ 4\ mod_121309860919 5_78.docx @ 8 6463 @ @ 1
Explanation of abbreviations:
A= Direction of rotation "A" to the middle
B= Direction of rotation "B" in pairs
RZ= Central bearing housing (clockwise threading), without identifying groove.
RE= Eccentric bearing housing (clockwise threading, without identifying groove).
LZ= Central bearing housing (anticlockwise threading), with identifying groove.
LE= Eccentric bearing housing (anticlockwise threading), with identifying groove.
Pos: 26.38.6 /B A/Wartung/Mäh werke/Schersich erung/Beschrei bung Schersic herung RZ,RE,LZ ,LE @ 3\mod _1204205493 155_78.docx @ 69 964 @ @ 1
For protection against overload on the mowing units, the rotary hubs (1) are secured with nuts
(2) and shear pins (3).
If the machine strikes obstacles (for example stones), the 2 shear pins in the rotary hub will be
sheared off. The rotary hub and nut turn upward on the pinion shaft.
• The cutting discs or drums which move crop to the left (as seen in the direction of travel)
(LE/LZ) have left-handed threading.
• The cutting discs or drums which move crop to the right (in the direction of travel)
(RE/RZ) have right-handed threading.
To distinguish between right-hand (clockwise) threading (RE/RZ) and left-hand (anti-clockwise)
threading (LE/LZ), the nuts (2) and pinion shaft (4) for left-hand threading (LE/LZ) have a
distinctive grove (a, b).
• Left-handed (LE/LZ) nuts (2) have distinctive grooves (a) on the bevel.
• Left-handed (LE/LZ) pinion shafts (4) have a distinctive groove (b) on the face.
Pos: 26.38.7 /B A/-------- -------Seitenumbruch--- --------- ---- @0\ mod_11961753 11226_0.docx @ 4165 @ 3 @ 1
To Next Page
Loading...
