3.5.1 Genera ................................................................................................................... III -7
4 Handling the swather when in use ............................................... IV -1
4.1 Mounting on the tractor .......................................................................................... IV -1
4.2 Overload protection feature ................................................................................... IV -1
4.3 Converting from transport to working position........................................................ IV -2
4.3.1 Lowering the rotor arms – mechanically ................................................................ IV -2
4.3.2 Lowering the rotor arms – hydraulic single-rotor lifting system .............................. IV -2
IV -2
4.3.3 Lowering the rotor arms – electrically (optional) .................................................... IV -2
4.3.4 Folding the tine arms into working position ........................................................... IV -3
4.3.5 Moving the external guard bars into working position ............................................ IV -4
4.4 Separate actuation of the left-hand/right-hand swather disk .................................. IV -4
4.4.1 Hydraulic single-rotor lifting system ....................................................................... IV -4
4.4.2 Electrical operation device (optional) .................................................................... IV -4
4.5 Conversion from working to transport position....................................................... IV -5
4.5.1 Moving the external guard bars into transport position .......................................... IV -5
4.5.2 Folding the tine arms into transport position .......................................................... IV -5
4.5.3 Lifting the rotor arms – mechanically ..................................................................... IV -6
4.5.4 Lifting the rotor arms – hydraulic single-rotor lifting system ................................... IV -6
4.5.5 Lifting the rotor arms – electrically (optional) ......................................................... IV -6
4.5.6 Securing the tine tips (transport position and parked swather) .............................. IV -7
4.5.7 Driving in sloping................................................................................................... IV -7
4.6 Removal from tractor ............................................................................................. IV -8
5 Basic setting..................................................................................... V -1
5.1 Height of the tractor lower link arms........................................................................ V -1
5.2 Setting the working depth ....................................................................................... V -1
5.3 Setting the Operating Width Electrical .................................................................... V -2
5.4 Setting the Operating Width Electrical / Mechanic .................................................. V -3
5.5 Setting the lateral inclination of the swather disk chassis ....................................... V -3
5.6 Adjusting the Direction of Travel ............................................................................ V -4
5.7 Travel speed and drive r.p.m. ................................................................................. V -4
6 Care and maintenance .................................................................. VI - 1
6.1 Special safety instructions .................................................................................... VI - 1
6.2 General instructions ............................................................................................. VI - 1
6.3 Tyres ................................................................................................................... VI - 2
6.3.1 Air pressure .......................................................................................................... VI - 2
6.3.2 Wheel fixings ........................................................................................................ VI - 2
6.4 Replacing the tine arms (in case of repair) ........................................................... VI - 3
6.5 Replacing the hydraulic hose lines ...................................................................... VI - 3
7 Lubrication..................................................................................... VII - 1
7.1 Universal drive shaft ............................................................................................ VII - 1
7.2 Bearings on the swather ...................................................................................... VII - 1
7.3 Lubrication chart .................................................................................................. VII - 3
8 Accessories...................................................................................VIII - 1