I - 1
1 General Information
The operating manual contains basic instructions to be
observed when attaching, operating and doing maintance
work. Therefore it is imperative that the operating personnel
have access to and read this operating manual before
putting into operation and using the implement.
Follow both the general safety instructions contained in the
section on safety and the specific safety instructions
contained in the other sections.
1.1 Proper Use
The rotary swather is used to swath cut hay.
It is installed inside the CAT I and CAT II three-point hitch
at the rear.
1.2 Specifications
1.2.1 Manufacturer's Address
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10
D-48480 Spelle (Germany)
Telephone: (49) 0 59 77/935-0
Fax: (49) 0 59 77/935-339
E-mail: info.ldm@krone.de
1.2.2 Certification
EC Declaration of Conformity
corresponding to the EC Directive
See reverse side of title page
1.2.3 Identification
The machine data are listed on the identification plate (1).
The entire identification plate re-
presents a legal document and should
not be altered or rendered illegible!
1.2.4 Data Required for Inquiries and
Orders
When making inquiries concerning the machine or
ordering replacement parts, be sure to provide type
designation, vehicle ID number and year of manu-
facture.
We recommend to note the data in the above fields in
order to have them available at all times.
Genuine replacement parts and
accessories authorized by the
manufacturer help ensure safety.
Use of other parts may void liability for
damage which results.
Vehicle
ID no.
Type
Year
KS-0-091
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10 D-48480 Spelle
Made in
Germany
To Next Page
Loading...
Need help?
General
