IV - 9
Handling the swather when in use
• Make sure when setting down the swather disk, that the ground is even and firm!
• Secure swather against rolling away before uncoupling!
• Also observe all further safety instructions!
4.6 Removal from tractor
• Choose a level, dry and appropriate load-bearing
surface.
• Fold support downwards and lock in this position with
the strut (1).
• Secure strut (1) with hairpin clip.
• Uncouple universal drive shaft and store on the
mount (2) provided.
• Disconnect the hydraulic hoses (1) and plug them
into the mounts provided.
• Undo the connection of the lighting cables (2)
between tractor and swather and plug them into the
mounts provided.
• Undo the power supply plug (3) (optional) between
tractor and swather and plug it into the mounts
provided.
KS-0-087
2
SW700014
1
SW700033
2
3
1
To Next Page
Loading...
