Chapter 2 Employee Functions
2-8 ADP, Inc.
Review Punches
Use the Review Punches transaction to view your punches. The timeclock will
default to a maximum of the past 72 hours unless your host application is
configured differently.
Simple Punch
Use the Simple Punch transaction to make an in or out punch by swiping your
badge through the Series 4000 timeclock’s integral badge reader or by keying in
your badge number using the keypad.
Note
You do not need to press any keys prior to keying in your badge number as you
had to do with the Series 400 timeclocks.
Step Display Action
1 Idle screen Press the Review Punches soft key.
2 Enter Badge Do one of the following:
! Swipe your badge from top to bottom.
! Type your badge number using the keypad, and
press ENTER.
Step Display Action
1 Idle screen Do one of the following:
! Swipe your badge from top to bottom.
! Type your badge number using the keypad, and
press ENTER.
To Next Page
Loading...