Kronos 4000 series - Symbology Setting (Basic Configuration)

To Next Page

To Previous Page

Chapter 4 Maintaining the Timeclock

4-50 ADP, Inc.

Symbology Setting (basic configuration)

Use Symbology Setting to indicate the type of bar code used on your employees’

badges, so that the timeclock can read the badges properly.

Caution

If you shut the Interleaved 12-of-5 setting off, you will not be able to read a

maintenance badge, preventing you from accessing Maintenance Mode.

Note

These settings are part of the basic configuration of the timeclock. You must

complete these settings when you power up the timeclock for the first time and if

you replace the cover assembly.

Step Display Action

1 Maintenance Mode idle

display

Press the Symbology Setting soft key.

2 Code 3-of-9

12-of-5

UPC-A

UPC-E

Code 128

EAN-8

EAN-13

Codabar

For each of the symbology settings, do one of the

following:

! Press ENTER to accept the default setting.

! Press the toggle soft keys to select OFF or ON

and press ENTER.

Note

Press ENTER on the last field to complete the

transaction.