Chapter 4 Maintaining the Timeclock
4-46 ADP, Inc.
Performing Maintenance Functions
This section presents brief descriptions of Maintenance functions, and instructions
about how to perform them.
Audio Setting (basic configuration)
Use Audio Setting to adjust the volume of the beeper and to enable or disable the
keys click when pressed. The beeper volume is saved when you exit the Beeper
Volume field. The Beeper Volume soft key is used to test the volume.
Note
These settings are part of the basic configuration of the timeclock. You must
complete these settings when you power up the timeclock for the first time and if
you replace the cover assembly.
Step Display Action
1 Maintenance Mode idle
display
Press the Audio Setting soft key.
2 Beeper Volume (1-14) Press the (+) and (-) soft keys to adjust the volume,
then press ENTER.
3 Key Click Press the (Off) and (On) soft keys to enable or
disable the key click, then press ENTER.
To Next Page
Loading...