Performing Maintenance Functions
Series 4000 Badge Timeclock User’s Guide 4-49
Display Setting (basic configuration)
Use Display Setting to set the contrast and brightness of the display screen. The
screen shows the effect after you have completed the transaction.
Note
These settings are part of the basic configuration of the timeclock. You must
complete these settings when you power up the timeclock for the first time and if
you replace the cover assembly.
Step Display Action
1 Maintenance Mode idle
display
Press the Display Setting soft key.
2 Contrast (16-22) Press the (+) and (-) soft keys to adjust the contrast
of the display, then press ENTER.
3 Brightness (4-16) Press the (+) and (-) soft keys to adjust the
brightness of the display, then press ENTER.
To Next Page
Loading...