Kronos 4000 series - Performing Supervisor Functions

Chapter 3 Supervisor Functions
3-4 ADP, Inc.
To perform Supervisor functions, you must first access Supervisor Mode. Then,
you can select the desired Supervisor function.
To access Supervisor Mode:
To exit from Supervisor Mode, press ESC.
Note
If the timeclock is idle for 45 seconds without any input from the keypad, it
automatically exits from Supervisor Mode and returns to Employee Mode.
Step Display Action
1 Idle screen Do one of the following:
! Swipe your supervisor badge from top to bottom
and press ENTER.
! Type in your supervisor badge number using the
keypad, and press ENTER.
2 Supervisor Login Type the password (up to 6 digits), and press
ENTER.
3 Supervisor Mode screen Press the desired Supervisor Command soft key.