ENGLISH
Note: the dispensing spout comprises plastic and metal
parts that are permanently joined together and do not
pose any problems of hygiene. Do not attempt to
separate these parts.
The beer dispensing mechanism must be cleaned using
a damp cloth and a mild detergent.
Note: use a piece of cotton to thoroughly clean all the
parts.
Warning! Do not attempt to clean the mechanism using
hard and/or sharp objects: it is a precision component
and you will risk damaging it.
Routine cleaning
Clean the appliance cooling chamber on a regular basis
using a damp cloth and mild detergent.
Warning! Do not fill the cooling chamber with water as
this may result in permanent damage. Never use
aggressive agents such as vinegar, acids, solvents or
petrol.
The tap cover can be removed.
Open the cover and remove it. Clean it with warm water
and a mild detergent.
Warning! Do not wash the tap cover in a dishwasher, as
it could be damaged and lose its shine. Never use
aggressive agents such as vinegar, acids, solvents or
petrol.
9 Childrenʼs safety
To prevent children from using the appliance, you can
remove the tap handle.
To remove the handle, make sure it is in an upright
position and pull it upwards.
17
To Next Page
Loading...
Need help?
General
