Krups BeerTender User Manual

ENGLISH
12 Troubleshooting
19
Problem Possible causes Remedies
The appliance
does not turn
on.
The appliance is
not connected to
the mains power
supply.
Connect the
appliance to the
power supply.
You can not fit
the BeerTender
Keg tap in the
tapping unit.
The BeerTender
Keg tap has been
activated by hand.
Put the BeerTender
Keg tap back in its
original position.
You can not
close the tap
cover.
The BeerTender
Keg tap is not
inserted correctly.
Remove the
BeerTender Keg
tap from the
appliance and fit it
again following
chapter 6 – Using
the BeerTender.
No beer is
being
dispensed.
The BeerTender
Keg is empty (last
level of volume
indicator is blinking).
Replace the
BeerTender Keg
with a new one.
There is no keg
inside the
BeerTender
appliance (the
4 levels of the
volume indicator
are blinking).
Install a keg inside
the BeerTender
appliance.
The BeerTender
appliance tap
handle is not
correctly
installed/positioned.
Install/position the
tap correctly.
The
BeerTender
appliance
produces too
much foam
when
dispensing
beer (see also
chapter 7:
Dispensing
beer).
The BeerTender
Keg has not
reached the right
dispensing
temperature.
Allow the
BeerTender Keg to
cool to the right
temperature. You
can rely on the
temperature
indicator on the
control display of
your BeerTender
appliance.
1-B90 oneway Amsterdam_UK_1-B90 oneway Amsterdam_UK.qxd 30/05/13 13:57 Page19

Krups BeerTender Specifications

General

Type	Beer Dispenser
Cooling System	Thermoelectric
Capacity	5 Liters
Brand	Krups
Model	BeerTender
Category	Kitchen Appliances
Voltage	120 V
Frequency	60 Hz
Color	Black, Silver
Compatible Kegs	Heineken, Newcastle Brown Ale
Weight	13.2 pounds
Temperature Indicator	LED
Compatibility	5L Heineken DraughtKeg, 5L BeerTender Kegs
Material	Plastic