ENGLISH
7
3 Technical specifications
Rated voltage: 220-240 V
Rated power: 61W
Power supply: 50Hz
Insulation class: II
Cooling class: SN
Casing material: Thermoplastic
Size 300 x 452 x 494
(w x h x d) (mm) (419 without drip tray)
Weight: 6,1 kg. (5,6 kg. without drip tray)
Cord length: 1.4 m
Beer container: BeerTender Keg
Control panel: Top
Operating conditions With 80% R.H.
min 12°C, max 30°C
The manufacturer reserves the right to make
constructive and engineering changes as warranted by
technological advances.
Appliance complying with European Directive
89/336/EEC (Legislative Decree 476 of 04/12/92)
concerning electromagnetic compatibility.
Never place powered components in contact with water.
There is a danger that this may cause a short circuit.
Intended use
This appliance has been manufactured exclusively for
dispensing beer in a domestic setting.
Only original BeerTender Kegs mentioning “Compatible
BeerTender” can be used with the appliance; you should
not use any other commercially available beer containers.
Before using a keg, check the “best before end” date
shown at the bottom of the keg. Do not insert or use
BeerTender Kegs after the date shown.
You should not use the appliance for purposes or with
containers other than those specified above.
You should not introduce any materials other than
BeerTender Kegs inside the appliance.
You should not make technical changes or use the
appliance in any manner other than as directed, due to
the risks involved!
The appliance should be used solely by adults in full
possession of their mental and physical capacities.
Cleaning
Before cleaning the appliance, it is essential to turn off the
main switch and then pull the plug out of the socket.
Never immerse the appliance in water!
To Next Page
Loading...
Need help?
General
