KSB PumpDrive - Page 143

Description Design Mat. No. [kg]
for mounting
PumpDrive to KSB
SuPremE motors,
including connection
cable and screws
Size 160M (type A)/PumpDrive size C 01374112 5.2
Size 160L (type A)/PumpDrive size C 01374113 5.2
Size 180M (type A)/PumpDrive size C 01374114 5.2
Size 180M (type A)/PumpDrive size D 01369835 10.9
Size 180L (type A)/PumpDrive size D 01374115 10.9
Size 200L (type A)/PumpDrive size D 01374116 10.9
Size 225S (type A)/PumpDrive size D 01374117 10.9
Size 225M (type A)/PumpDrive size D 01374118 10.9
Table 121: Motor adapter kits (accessories) for Movitec
Description Design Mat. No. [kg]
For mounting PumpDrive to
KSB Movitec A pump sets
Including connection cable
and bolts/screws
The adapter is mounted on
the pump. The holes for
fastening the adapters are
not drilled in the pump at
the factory for retrofit
configurations.
Size 0.37 - 1.1 kW/PumpDrive, size A 47121167 4.2
Size 1.5 - 3 kW/PumpDrive, size A 47121166 4.2
Size 4 kW/PumpDrive size B 47121165 4.7
Size 5.5 - 7.5 kW/PumpDrive, size B 47121164 5.9
Size 11 - 22 kW/PumpDrive, size C 47121163 9.7
12 Purchase Order Specifications
PumpDrive
143 of 162