4. Make the settings as described for the subsequent items.
5.
Press the OK key to save the new parameter value.
6.2.5.4 Menu: Information
All direct information about PumpDrive is provided in the Information section.
Important details regarding the firmware version are listed here.
6.3 Service interface
CAUTION
Improper use of service interface
Damage to connected laptop/PC!
▷ Only use the connection cable approved by KSB (USB - RS232).
The service interface allows a PC/notebook to be connected via a special cable (USB -
RS232).
The following actions can be taken:
▪ Configuring and parameterising PumpDrive with the PumpDrive service software
▪ Software update
▪ Saving and documenting set parameters
6 Operation
48 of 162
PumpDrive
To Next Page
Loading...
