EasyManua.ls Logo

KTM 150 SX 2021 - Riding Instructions; Pre-Ride Checks; Starting and Riding

KTM 150 SX 2021
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 PREPARING FOR USE
28
7.8 Preparing vehicle for high temperatures or slow riding
M01129-01
Check the radiator cap.
Value on the radiator cap 1.8 bar (26 psi)
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scaldingDuring motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
In the event of scalding, rinse the area
affected immediately with lukewarm water.
Change the radiator cap.
600868-01
Adjust the secondary drive to the road conditions.
Info
The engine oil heats up quickly when the clutch is
operated frequently due to an excessively high sec-
ondary ratio.
Clean the chain.
Chain cleaner ( p. 143)
Clean the radiator fins.
Straighten the bent radiator fins carefully.
Check the coolant level. ( p. 104)
7.9 Preparing the vehicle for low temperatures or snow
M01106-01
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for KTM PowerParts.

Table of Contents

Other manuals for KTM 150 SX 2021

Related product manuals