What to do if the headlight and position light are not functioning on my KTM Motorcycle?
If the headlight and position light aren't working on your KTM Motorcycle, it's likely due to a blown fuse 6. Replace the fuse.
What to do if time is not correctly displayed on my KTM 890 Duke R US 2020?
If the time is not correctly displayed on your KTM Motorcycle, it could be due to a blown fuse 1. Replace the fuse and set the time and date. Alternatively, the 12-V battery may not be charging, so check the charging voltage and the open-circuit current.
What to do if the combination instrument shows nothing on the display of my KTM 890 Duke R US 2020 Motorcycle?
If the combination instrument shows nothing on the display of your KTM Motorcycle, it's probably because fuse 1 or 2 is blown. Replace the fuses and set the time and date.
Why does the idling speed indicator lamp not light up when the transmission is in neutral on my KTM 890 Duke R US 2020?
If the idling speed indicator lamp doesn't light up when the transmission is in neutral on your KTM Motorcycle, it's likely because the gear position sensor is not programmed.
General| Displacement | 889 cc |
|---|---|
| Transmission | 6-speed |
| Dry Weight | 166 kg |
| Fuel Capacity | 14 L |
| Tires Front | 120/70 ZR17 |
| Tires Rear | 180/55 ZR17 |
| Engine Type | Liquid Cooled, Parallel Twin, DOHC, 4 Valves Per Cylinder |
| Power | 121 hp |
| Torque | 99 Nm @ 7750 rpm |
| Frame | Chromium-Molybdenum steel trellis frame, powder coated |
| Front Suspension | WP APEX 43mm USD forks, fully adjustable |
| Rear Suspension | WP APEX monoshock, fully adjustable |
| Front Brakes | Twin 320 mm discs |
| Rear Brakes | 240 mm disc |
| ABS | Bosch 9.1 MP (incl. Cornering ABS and Supermoto ABS) |
| Seat Height | 835 mm |
| Wheelbase | 1482 mm |
| Warranty | 2 years |
Provides critical advice for safe vehicle operation, including hazards.
Explains the importance of regular service for vehicle longevity.
Details controls located on the left side of the handlebar.
Details controls located on the right side of the handlebar.
Locates and explains the states of the ignition and steering lock.
Details the various indicator lamps and their meanings.
Provides an overview of the information displayed on the instrument.
Explains how warnings are displayed and acknowledged.
Detailed steps for starting the motorcycle engine safely.
Instructions on how to begin riding the motorcycle.
Details safe and effective braking techniques and warnings.
Instructions and warnings related to refueling the vehicle.
Explains the ABS system, its components, and warnings.
How to correctly check the engine oil level.
Procedure for oil and filter change, and cleaning oil screens.
Lists possible causes and solutions when the engine turns but doesn't start.
Identifies causes and actions for engine overheating.
Explains what to do when the malfunction indicator lamp is active.
Explains reasons for the ABS warning lamp and troubleshooting.
Troubleshooting for a blank instrument display.
To Next Page