KTM 890 DUKE R - Shock Absorber; Chassis Tightening Torques

TECHNICAL DATA 23
131
23.8 Shock absorber
Shock absorber article number 15.18.7T.49
Shock absorber WP APEX 5746
Low-speed compression damping
Comfort 16 clicks
Standard 14 clicks
Sport 10 clicks
Full payload 14 clicks
High-speed compression damping
Comfort 1.5 turns
Standard 1.5 turns
Sport 1.5 turns
Full payload 1.5 turns
Rebound damping
Comfort 17 clicks
Standard 14 clicks
Sport 12 clicks
Full payload 11 clicks
Spring preload - Preload Adjuster
Comfort 1 turn
Standard 3 turns
Sport 5.5 turns
Full payload 6 turns
Spring rate
Soft 138 N/mm (788 lb/in)
Medium (standard) 150 N/mm (857 lb/in)
Hard 162 N/mm (925 lb/in)
Spring length 195 mm (7.68 in)
Gas pressure 10 bar (145 psi)
Fitted length 392 mm (15.43 in)
Damper oil Shock absorber fluid (SAE 2.5)
(50180751S1) ( p. 138)
23.9 Chassis tightening torques
Brake fluid reservoir cover, front - 0.7 Nm (0.52 lbf ft)
Radiator hose hose clamp - 2.2 Nm (1.62 lbf ft)
Remaining screws, chassis EJOTPT
®
K45x12 1 Nm (0.7 lbf ft)
Remaining screws, chassis EJOTPT
®
K50x12 1 Nm (0.7 lbf ft)
Remaining screws, chassis EJOTPT
®
K50x14 1 Nm (0.7 lbf ft)
Remaining screws, chassis EJOTPT
®
K50x16 2 Nm (1.5 lbf ft)
Remaining screws, chassis EJOTPT
®
K50x18 2 Nm (1.5 lbf ft)
Screw, headlight EJOTPT
®
K50x14 3 Nm (2.2 lbf ft)
Throttle valve body hose clamp - 2.8 Nm (2.07 lbf ft)
Remaining nuts, chassis M4 3 Nm (2.2 lbf ft)