COMBINATION INSTRUMENT 7
43
– Confirmation of the Passkey successfully completes the cell-
phone pairing.
Info
When a suitable device has been successfully paired,
the name of the paired cellphone or headset appears in
each case in the Phone or Headset menu.
Press the UP or DOWN button until the paired device is
marked. The paired device can be deleted by pressing
the SET button.
The device most recently linked is automatically paired
with the KTM MY RIDE control unit when Bluetooth
®
is
switched on and as soon as this device is in range and
has not been previously deleted.
Not every cellphone or headset is suitable for pairing
with the KTM MY RIDE control unit.
Make sure that the end device is in the correct pairing
mode for call administration. If the end device is only
paired for media playback, the call function may not
work.
7.16.34 Audio player (optional)
H02860-01
Condition
• Function KTM MY RIDE (optional) activated.
• Bluetooth
®
(optional) is switched on.
• Similarly, the Bluetooth
®
is also switched on when devices are
paired.
• Headset connected to a suitable audio device.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until the KTM MY RIDE menu is
marked on the display. Press the SET button to open the menu.
Warning
Danger of accidents Headphone volume which is too
high distracts attention from traffic activity.
– Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.
– Press the UP or DOWN button until Audio player is marked on
the display. Press the SET button to open the menu.
– Press and hold the UP button to increase the audio volume.
– Press and hold DOWN button to reduce the audio volume.
– Press the UP button briefly to change to the next audio track.
– Press the DOWN button briefly to play the audio track from the
beginning.
– Press the DOWN button twice to change to the previous audio
track.
– Press the SET button to play or pause the audio track.
To Next Page
Loading...
