To Next Page

To Previous Page

23 TECHNICAL DATA 192

Screw, ground cable, on frame M6 7 Nm (5.2 lbf ft) –

Screw, handlebar stub M6 7 Nm (5.2 lbf ft) Loctite

243™

Screw, ignition coil M6 9 Nm (6.6 lbf ft) –

Screw, ignition lock M6 11 Nm (8.1 lbf ft) –

Screw, license plate holder on license

plate bracket

M6 7 Nm (5.2 lbf ft) –

Screw, magnetic holder on side stand M6 5 Nm (3.7 lbf ft) Loctite

243™

Screw, mirror holder M6 9 Nm (6.6 lbf ft) –

Screw, passenger seat M6 7 Nm (5.2 lbf ft) –

Screw, radiator air inlet, on frame M6 6 Nm (4.4 lbf ft) –

Screw, radiator holder M6 6 Nm (4.4 lbf ft) –

Screw, rear ABS sensor wheel (RC 125) M6 6 Nm (4.4 lbf ft) Loctite

204™

Screw, rear fender M6 7 Nm (5.2 lbf ft) –

Screw, retaining bracket, EFI control

unit

M6 6 Nm (4.4 lbf ft) –

Screw, shift lever linkage M6 11 Nm (8.1 lbf ft) Loctite

243™

Screw, side cover M6 7 Nm (5.2 lbf ft) –

Screw, side cover on front mask M6 6 Nm (4.4 lbf ft) –

Screw, voltage regulator M6 11 Nm (8.1 lbf ft) –

Screw, voltage regulator holder M6 11 Nm (8.1 lbf ft) –

Screw, wheel speed sensor holder

(RC 125)

M6 8 Nm (5.9 lbf ft) –

Screw, windshield M6 9 Nm (6.6 lbf ft) –

Fitting, engine mounting bracket M8 48 Nm (35.4 lbf ft) –

Remaining nuts, chassis M8 25 Nm (18.4 lbf ft) –

Other manuals for KTM RC 125

Questions and Answers:

Need help?

Do you have a question about the KTM RC 125 and is the answer not in the manual?

General

Displacement	124.7 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Bore x Stroke	58 mm x 47.2 mm
Engine Type	Liquid-cooled, 1-cylinder, 4-stroke engine
Max Torque	12 Nm @ 8, 000 rpm
Front Suspension	WP upside-down fork
Rear Suspension	WP Monoshock
Front Brake	Single disc, 4-piston caliper
Rear Brake	Single disc, single-piston caliper
Frame	Steel trellis frame
Front Tire	110/70 R17
Rear Tire	150/60-17