To Next Page

To Previous Page

23 TECHNICAL DATA 193

Remaining screws, chassis M8 25 Nm (18.4 lbf ft) –

Screw, chain guard M8 11 Nm (8.1 lbf ft) –

Screw, engine bearer on frame M8 24 Nm (17.7 lbf ft) –

Screw, foot brake lever M8 17 Nm (12.5 lbf ft) Loctite

243™

Screw, front brake disc M8 30 Nm (22.1 lbf ft) Loctite

243™

Screw, front wheel spindle M8 26 Nm (19.2 lbf ft) –

Screw, fuel tank attachment, rear, on

frame

M8 16 Nm (11.8 lbf ft) –

Screw, horn M8 7 Nm (5.2 lbf ft) –

Screw, main silencer M8 24 Nm (17.7 lbf ft) –

Screw, passenger footrest bracket M8 26 Nm (19.2 lbf ft) Loctite

243™

Screw, rear brake disc M8 30 Nm (22.1 lbf ft) Loctite

243™

Screw, shift lever M8 17 Nm (12.5 lbf ft) Loctite

243™

Screw, top triple clamp M8 15 Nm (11.1 lbf ft) –

Screw, front brake caliper M8x1 30 Nm (22.1 lbf ft) Loctite

204™

Banjo bolt, brake line M10 24 Nm (17.7 lbf ft) –

Remaining nuts, chassis M10 45 Nm (33.2 lbf ft) –

Remaining screws, chassis M10 45 Nm (33.2 lbf ft) –

Fitting, shock absorber, bottom M10x1.25 50 Nm (36.9 lbf ft) –

Nut, rear sprocket screw M10x1.25 27 Nm (19.9 lbf ft) Loctite

243™

Screw, front footrest bracket / engine

bearer

M10x1.25 47 Nm (34.7 lbf ft) –

Screw, side stand bracket M10x1.25 33 Nm (24.3 lbf ft) Loctite

243™

Stud, rear sprocket M10x1.25 50 Nm (36.9 lbf ft) –

Nut, rear wheel spindle M14x1.5 90 Nm (66.4 lbf ft) –

Other manuals for KTM RC 125

Questions and Answers:

Need help?

Do you have a question about the KTM RC 125 and is the answer not in the manual?

General

Displacement	124.7 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Bore x Stroke	58 mm x 47.2 mm
Engine Type	Liquid-cooled, 1-cylinder, 4-stroke engine
Max Torque	12 Nm @ 8, 000 rpm
Front Suspension	WP upside-down fork
Rear Suspension	WP Monoshock
Front Brake	Single disc, 4-piston caliper
Rear Brake	Single disc, single-piston caliper
Frame	Steel trellis frame
Front Tire	110/70 R17
Rear Tire	150/60-17