PERIODIC SERVICE36
ENGLISH
HOW TO OPEN THE LEVER GUIDE
To avoid serious injury or death:
A Park the machine on a firm and level surface.
A Stop the engine, remove the key and apply the
parking brake.
1. Remove the 4 screws of the lever guide.
2. Pull up the lever guide.
How to install the lever guide.
1. Install the lever guide.
2. Tighten the screws.
A If the lever guide is out of alignment with the motion
lever, move the lever guide to align it with the motion
lever.
LIFT-UP POINT
To avoid serious injury, death or machine damage:
A Do not work under the machine unless it is
secured by safe stands or suitable blocking.
BFront side:
Lift the front axle with nylon slings.
A When you use nylon slings, make sure to block rear
wheels with chocks.
A Never lift up anything except the front axle.
(1) Lever guide
(2) Screw
(1) Nylon sling
(2) Front axle
(3) Chock
To Next Page
Loading...
