EasyManua.ls Logo

Kubota ZD1021 - Checking Tire Pressure; Inflation Pressure

Kubota ZD1021
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERIODIC SERVICE44
ENGLISH
BChecking Tire Pressure
To avoid serious injury or death:
A Do not attempt to mount a tire on a rim. This
must be done by a qualified person with the
proper equipment.
A Always maintain the correct tire pressure.
Inflation pressure in tires rises quickly when
using compressed air.
Do not inflate tires above the recommended
pressure shown in the Operator's Manual.
A Do not use tires larger than specified.
BInflation Pressure
Though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course of
time. Thus, check it and inflate as necessary.
Tire sizes
Recommended
Inflation Max.
Pressure
ZD1011
Front
13 x 5.0 - 6
Smooth pneumatic
172 kPa
(1.75 kgf/cm ,
24.9 psi)
Rear
24 x 9.5 - 14
Low profile type
83 kPa
(0.84 kgf/cm ,
12.0 psi)
ZD1021
Front
13 x 6.5 - 6
Smooth pneumatic
172 kPa
(1.75 kgf/cm ,
24.9 psi)
Rear
24 x 12 - 14
Low profile type
83 kPa
(0.84 kgf/cm ,
12.0 psi)
(1) Ground (A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"

Table of Contents

Related product manuals