Kyocera ECOSYS FS-1135MFP Printer Driver User Guide

4 Basic
In the Basic tab, you can specify the most commonly used printer driver
settings.
Basic Settings
The Basic tab contains several settings for the most commonly used printing
tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of
the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws
paper from. Unless you are using a custom paper type, you can leave it set
to Auto source selection.
Page Sizes
This setting should match the page size setting in your application. The
printing result is based on the page size specified in this setting. You can
also create a custom page size.
Media type
This setting selects the Source based on the types of media that are
specified in the printing system. In general, you can leave it set to
Unspecified.
Destination
This setting specifies which output tray is used for the print job output.
4-1 User Guide

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)