Advanced
All pages
This option prints the watermark on each document page.
First page only
This option prints the watermark on the first document page.
All pages except first page
This option prints the watermark on all pages after the first page.
Only on specified pages
This option prints the watermark on page numbers typed in the box.
Print onto front outside cover
This option prints the watermark on the front cover. It is available when
Cover mode is selected in the Publishing tab. If Cover mode and Front
outside are both selected in the Publishing tab, Print onto front outside
cover is selected automatically.
3
In all dialog boxes, click OK.
Security Watermark
The Security Watermark is a plug-in feature that prints a nearly invisible image
or text against a background pattern. The security watermark appears only
when the printed page is photocopied. This helps to identify printed pages that
should not be photocopied, or to distinguish between original prints and
photocopies. Six standard security watermarks are available as text or image,
and you can create custom security watermark text.
A notable feature of Security Watermark is the Document guard pattern,
which prevents the document from being photocopied, scanned, faxed, or
printed from memory. If a scan, fax, or print from memory is attempted, the
process is stopped and an error message appears on the printer's operation
panel.
Following installation of the printer driver, use the Optional Printer
Components wizard to install the Security Watermark plug-in.
Security Watermark appears in the Advanced tab when PCL XL is selected in
the PDL Settings dialog box.
The administrator can ensure that a security watermark is printed on all jobs by
selecting Device Settings > Administrator > Lock Settings > Lock Security
Settings.
Selecting Security Watermark sets these driver features to the following
values:
Watermark in the Advanced tab is set to None.
Resolution in Imaging > Print Quality > Custom > Custom Quality is set
to 600 dpi.
Kyocera Image Refinement in Imaging > Print Quality > Custom >
Custom Quality is set to Off.
EcoPrint in Quick Print, Basic > Quality, or Imaging > Quality is set to
Off.
Adjustment Settings (Brightness and Contrast) in Imaging > Grayscale
> Adjustment > Custom is set to 0.
The reverse is also true. If these features are changed, then the Security
Watermark selection is set to None, and cannot be used.
Printer Driver 9-5
To Next Page
Loading...
Need help?
General
