4-14
Printing from PC > Printing Data Saved in the Printer
Printing Document from Quick Copy Box
Quick Copy feature facilitates additional prints of a document already printed. Activating Quick Copy and printing a
document using the printer driver allow the print data to be stored in the Quick Copy Job Box. When additional copies
are required, you can reprint the required number of copies from the touch panel. By default, up to 32 documents can be
stored. When power is turned off, all stored jobs will be deleted.
1
Display the screen.
1 [Home] key > [Job Box]
2 Select [Quick Copy/Proof and Hold].
3 Select the creator of the document.
2
Print the document.
1 Select the document to print > [Print]
2 Specify the number of copies to print as desired.
3 Select [OK].
Printing starts.
Deleting the Documents Stored in the Quick Copy Box
1
Display the screen.
1 [Home] key > [Job Box]
2 Select [Quick Copy/Proof and Hold].
3 Select the creator of the document.
2
Delete the document.
1 Select the document to delete > []
2 Select [Yes].
The document is deleted.
• When the number of jobs reaches the limit, the oldest job will be overwritten by the new one.
• To maintain free space on the box, you can set the maximum number of stored jobs.
Quick Copy Job Retention (page 8-22)
Job Box - Quick Copy/Proof and Hold
10:10Document Box.
doc0100908134821
doc4100908135138
< Back PrintMenu
1/1
Cancel
2014/10/10 10:10
2014/10/10 11:11
To Next Page
Loading...
Need help?
General
