9-26
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
PIN Login Settings
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 Select [PIN Login].
2
Configure the settings
1 Select [Off] or [On].
2 Select [OK].
This setting is only displayed when [Network Authentication] must be selected for the authentication method and the
server type is set to [Ext.] in "Network Authentication".
Optional Applications (page 11-6)
If the user authentication screen appears, enter your login user name and login
password and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 2600
Login Password: 2600
To Next Page
Loading...
Need help?
General
