8-18
Setup and Registration (System Menu) > System Menu
Error Handling
[System Menu/Counter] key > [Common Settings] > [Error Handling]
Select whether to cancel or continue the job when error has occurred.
Color Toner Empty Action
[System Menu/Counter] key > [Common Settings] > [Color Toner Empty Action]
Measurement
[System Menu/Counter] key > [Common Settings] > [Measurement]
Low Toner Alert
[System Menu/Counter] key > [Common Settings] > [Low Toner Alert]
Item Description
Duplexing Error Set what to do when duplex printing is not possible for the selected paper sizes and media
types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Paper Mismatch Error Set what to do when the selected paper size or type does not match paper size or type loaded
in the specified paper source while printing from the computer by specifying the cassette or
multipurpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Item Description
Color Toner Empty Action Select whether printing is prohibited or the Print in Black and White setting is used for printing
once the color toner runs out.
Value: Stop printing, Print in Black & White
Item Description
Measurement Select metric or inch for the unit for paper dimensions.
Value: mm, inch
Item Description
Low Toner Alert Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in
1% increments).
To Next Page
Loading...
Need help?
General
