Using Various Functions > Functions
344
Combine
[Layout/Edit]
Combines 2 or 4 original sheets into 1 printed page.
You can select the page layout and the type of boundary lines around the pages.
The following types of the boundary lines are available.
[Off]
[2 in 1]
Layout
Border Line
Original Orientation
Value Description
[Left to Right/Top to Bottom],
[Right to Left/Bottom to Top]
Select the page layout of scanned originals.
Value Description
[None], [Solid Line], [Dotted Line],
[Positioning Mark]
Select the boundary line type.
Value Description
[Top Edge on Top], [Top Edge on
Left], [Auto]
*1
Select the orientation of the original document top edge to scan correct
direction.
Select the orientation of the original from [Top Edge on Top] or [Top
Edge on Left].
To Next Page
Loading...
